![]() Step 2: Download the Appropriate Device Pack Time Zone : British Summer Time (Europe/London) ![]() ![]() You can also get this information from the web browser: admin: show version active Step 1: Verify the CUCM Version you are running These notes are applicable on the following versions but tested for 10.5(2) This is the Android version of the DX which is not the same as the ‘Cisco TelePresence DX80’ you see on the web browser of the endpoint.įor this you need to install the relevant device pack to get the ball rolling and endpoint registered. I was running a DX80 with a CE firmware load but the lab CUCM we had installed did not support the CE Version of code, when i first tried registering the endpoint to the CUCM it came up with the following error: Failed: 485 Ambigious / Device Type Mismatch,i had a look at CUCM to see if the device load was installed but only the “Cisco DX80” endpoint was available.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |